FRP environmental protection equipment manufacturer | Specializing in the production of FRP pipes/tanks/towers/profiles/grating

FRP Grating with cover for anti-slip walkway and work platform

FRP Grating with cover for anti-slip walkway and work platform

Oil pollution, water accumulation, chemical corrosion…walkways in industrial scenes are full of dangers;
Aging, rust, high maintenance consumption…the shortcomings of traditional covers need to be broken.
Fiberglass anti-skid pattern cover plate uses “anti-skid + sealing” dual-core technology to redefine the safety standards of environmental walkways, so that every step is steady and every inch is closely protected.

FRP Grating with anti-slip cover (6)

FRP Grating with anti-slip cover

  • 3mm deep diamond anti-skid pattern + surface frosting process, the friction coefficient in wet and slippery environment reaches 0.85 (national standard ≥0.5), and it is still anti-skid as before in oily environment.
  • Compression and impact resistance: bearing strength ≥5 tons/㎡, resistant to instantaneous impact without fragmentation, suitable for heavy machinery high-frequency rolling scenes.
  • Sealed zero penetration, corrosion-resistant all-weather
    ▷Seamless splicing: customized buckle design, sealing strips filled at the seams, completely blocking liquid and gas leakage, protection level IP68.
    ▷ Chemical immunity: resistant to strong acid (pH1-14), salt spray, and organic solvent corrosion, with a service life of up to 25 years* (traditional steel plate life <8 years).
  •  Lightweight intelligent manufacturing, installation and load reduction
  •  Weight reduction of 70%: The density is only 1/4 of steel, and one person can carry it, and the construction efficiency is increased by 2 times.
  •  Maintenance-free design: rust-proof, crack-proof, and non-conductive, and the annual comprehensive maintenance cost is reduced by 90%.

Main Use

“Where the danger is, there is the line of defense”

  • Chemical plant walkway: acid and alkali corrosion resistance + explosion-proof design to protect the safety of patrol personnel;
  • Offshore platform deck: salt spray resistance + UV resistance, facing strong winds and waves without deformation;
  • Food workshop: seamless anti-bacterial leakage, passed FDA food grade certification;
  • High-altitude fire passage: flame retardant grade V0, no brittleness at extreme temperature differences from -50℃ to 120℃
FRP Grating with anti-slip cover (6)
anti-skid frp grating

Application areas of FRP Grating

  • Chemical industry: used in corrosive environments such as pickling workshops, electroplating plants, chemical plants, etc.
  • Sewage treatment: used as sewage pool cover and walkway grating, corrosion-resistant and easy to clean.
  • Oil platform: offshore drilling platform walkways, non-slip pedals, resistant to salt spray corrosion.
  • Food processing: suitable for humid, easy-to-clean environments, FDA compliant.
  • Transportation facilities: non-slip walkways in subway stations, airports, docks, etc.
  • Power industry: substation insulation grilles, cable trench covers, etc.
anti-skid frp grating
FRP Grating with anti-slip cover (6)
FRP Grating with anti-slip cover (6)
FRP Grating with anti-slip cover (6)
Production Process of FRP Grating

The production of FRP grating mainly adopts the following processes:

Molding: After mixing glass fiber and resin, put them into the mold for high temperature and high pressure curing and molding, which is suitable for standard specification gratings.

Pultrusion molding: Produce grating profiles through pultrusion process, and then assemble them into grating plates, which are suitable for high-strength demand scenarios.

Hand lay-up molding: Suitable for customized special-shaped gratings, which are cured and molded after manual laying.

Vacuum infusion: The resin evenly penetrates the fiber under vacuum environment to improve the density and strength of the product.

High Strength

The specific strength of FRP is higher than that of steel, and the hoop tensile strength can reach more than 300MPa.

Corrosion Resistance

It can resist corrosion from chemical media such as acids, alkalis, salts, and organic solvents, and its service life is more than 30 years.

Light Weight

The density is only 1/4 of that of steel pipes, which is convenient for transportation and installation.

Low Friction Coefficient

The inner wall is smooth (roughness coefficient 0.0084), the hydraulic performance is excellent, and the conveying efficiency is high.

Good thermal insulation

Low thermal conductivity (0.25W/m·K), reducing heat energy loss.

Anti-aging&Electrical insulation

Anti-ultraviolet agent is added, suitable for outdoor and harsh environments. Non-conductive, suitable for power, communication and other fields.

OUR PROJECT

FRP Grating size and thickness selection guide

FRP grating size and thickness selection guide: analysis of application scenarios of different specifications FRP grating (FRP grating)…

Learn More
Application case analysis of FRP grating in sewage treatment plants | Corrosion-resistant and anti-slip solutions

FRP Grating in Sewage Treatment Plants FRP grating (also known as FRP grating, composite grating) is a grid-like…

Learn More
FRP Grating with cover for anti-slip walkway and work platform

FRP Grating with cover for anti-slip walkway and work platform Oil pollution, water accumulation, chemical corrosion…walkways in industrial…

Learn More
FRP Grating for car wash shop

FRP Grating for car wash shop The car beauty industry has grown and developed, and composite fiberglass grating…

Learn More
Emery Surface Anti-Skid FRP Grating

FRP Grating FRP Emery Surface Anti-skid Grating (FRP anti-skid grating) is a new composite material grating with glass…

Learn More
FRP Mini Mesh Grating for breeding

FRP Moulded Grating Mini Mesh for breeding FRP mesh panels, as a high-performance composite material product, are highly…

Learn More
Transparent and Translucent FRP Grating

Transparent and Translucent FRP Grating Transparent and translucent fiberglass grating has become an upgraded alternative to traditional materials…

Learn More
The main use and feature of FRP Grating

FRP Grating FRP grating (also known as FRP grating, composite grating) is a grid-like plate made of glass…

Learn More
FRP Grating for Solar Project Walkway

FRP grating (also known as FRP grating, composite grating) is a grid-like plate made of glass fiber as…

Learn More

How to choose the right FRP grating?

Choose thickness according to load-bearing requirements: light load (25mm), medium load (38mm), heavy load (50mm).

Consider the corrosive environment: choose a resin type that is resistant to acid, alkali and salt spray.

Anti-slip requirements: choose a sand surface or patterned surface treatment.

Color and aesthetics: choose the right color according to the use environment.

FRP grating has become an ideal substitute for traditional metal gratings due to its excellent corrosion resistance, high strength, light weight and long life. As a professional FRP grating manufacturer, we provide a variety of specifications and customized services, suitable for chemical, electric power, shipbuilding, construction and other fields. If you need to know more about the price, model and installation method of FRP grating, please consult!

Select your currency